Reno Megan, Stsenik
+ Cars of mark Renault Megane
+ Maintenance service
- Engine repair
+ Repair of petrol engines of 1.4 l and 1.6 l in an impellent compartment
+ Repair of petrol engines of 2.0 l in an impellent compartment
- Repair of the diesel engine in an impellent compartment
The description of check of a compression and tightness of connections of components
Arrangement of the top dead point (ВМТ) for the piston №1
Check and adjustment of backlashes of valves
Removal, survey and installation gear drive a belt
Removal at installation of cogwheels drive a belt and the tension mechanism
Replacement of epiploons of a cam-shaft
Removal, survey and installation of a cam-shaft and pushers
Removal, survey and installation of a head of the block of cylinders
Removal and pallet installation
Removal, survey and installation of the oil pump
Replacement of epiploons коленвала
Replacement of support of the engine/transmission
Removal and installation of an oil radiator
Replacement of an epiploon of an intermediate shaft
Removal, survey and flywheel installation
+ Procedures of removal and engine major repairs
+ System of cooling, heating
+ Power supply systems, release
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Electric equipment schemes
|
Replacement of support of the engine/transmission
|
|
|
1. Cock a manual brake, then поддомкратьте a forward part of the car and establish it on axial props. Where is available, remove the bottom guard of the engine.
2. Visually examine rubber pillows on two lobbies and one back arms of fastening of the engine/transmission that on them there were no cracks and pollution. Check up, that fixing details of all arms have been reliably clamped; thus use динамометрический a key. If there is an excessive movement of support or the condition of rubber of pillows has worsened, it is necessary to replace a support. |
|
THE RIGHT FORWARD SUPPORT
The inhaling moments (in Nanometer) engine/transmission support
|
|
|
And — Tighten a rack the moment of 60 Nanometers
In — Tighten a nut the moment of 40 Nanometers |
|
|
|
|
1. Attach лебедку to assembly eyes of the engine to support engine/transmission assemblage while the support will be removed. For assemblage maintenance it is possible to use a jack and suitable wooden брусок to increase the support area under the pallet.
2. On engines F8Q, turn away bolts of fastening and remove the top plastic cover drive a belt / the right support of the engine. On engines F9Q, turn away fixing nuts and remove a sound-proof cover.
3. Be convinced that engine/transmission assemblage is reliably supported, then turn away a nut, крепящую the top arm of a support to assemblage of the terminator of movement / to a rubber pillow on a body.
|
|
4. Turn away three bolts, fastening the top arm of a support to the main arm on the engine, then remove an arm (address to an accompanying illustration). |
5. Turn away bolts, fastening assemblage of the terminator of movement / a rubber support of the engine to a body, and remove assemblage.
6. Remove external covers of a gear belt that it was possible to reach to fixing bolts of the main arm on the engine. Turn away bolts and remove the main arm.
7. Establish assemblage of the terminator of movement / rubber pillows. On engines F8Q do not clamp while completely fastening bolts.
8. Establish the top arm and tighten its bolts the effort resulted in Specifications. On engines F8Q do not clamp while completely a nut, крепящую an arm to assemblage of the terminator of movement / a rubber pillow.
9. Remove лебедку or a jack.
10. On engines F8Q, now assemblage of the terminator of movement / a rubber pillow is necessary for centering before to clamp fixing bolts (on engines - assemblage self-aligned). Technicians Renault use special doubled capture Mot. 1289-03 which is inserted through grooves in an arm. If this tool is not accessible, it can be made of metal strips.
11. Having centered a support, tighten its nut of fastening by the effort resulted in Specifications (address to an accompanying illustration). Remove the tool and establish a plastic cover or an engine cover where is available. |
|
FORWARD LEFT SUPPORT
|
|
|
1. Remove the left wheel.
2. Using a jack and wooden брусок, support transmission weight.
3. Turn away a nut, крепящую a rack of the bottom fastening to the top arm. Strike on a rack киянкой to release it from the top arm.
|
|
4. Turn away a rubber part of the top fastening and an arm (address to an accompanying illustration). |
5. Turn away an arm of the bottom fastening.
6. Establish new fixing details, operating in the return to removal an order, and tighten a rack, nuts and bolts effort of the inhaling specified in illustrations above (the inhaling Moments (in Nanometer) engine/transmission support). |
|
BACK SUPPORT
|
|
|
1. Remove assemblage of the air filter as it is described in the Head of the Power supply system and release.
2. Working in an impellent compartment, below on the left side of the engine turn away a nut from bolts, крепящих an arm of a back support to transmission. Simultaneously turn away the shock-absorber from the top part of a support.
3. Using лебедку or a jack with wooden бруском, slightly raise the engine to clean loading from a back support.
|
|
4. Turn away bolts from an arm and separate an arm from transmission and a stretcher (address to an accompanying illustration). |
5. Establish a new support, operating in the return to removal an order, and tighten bolts effort of the inhaling shown on an illustration above (the inhaling Moments (in Nanometer) engine/transmission support). |
|
|
|
