Renault Megane, Scenic

Since 1996 of release

Repair and car operation

Reno Megan, Stsenik
+ Cars of mark Renault Megane
+ Maintenance service
+ Engine repair
+ System of cooling, heating
+ Power supply systems, release
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
- Brake system
   Prorolling of hydrosystem of brakes
   Replacement of brake tubes and hoses
   Replacement колодок forward brake mechanisms
   Replacement колодок back brake mechanisms
   Survey, removal and installation of a disk of the forward brake mechanism
   Removal, survey and installation of drums of back brake mechanisms
   Removal, partition and installation of supports of forward brake mechanisms
   Removal and installation of the cylinder of the back brake mechanism
   Removal, partition and installation of the main cylinder
   Removal and installation of a pedal of a brake
   Check, removal and installation of the block of the vacuum amplifier
   Removal, check and installation of the unilateral valve of the block of the vacuum amplifier
   Adjustment of a manual brake
   Removal and installation of the lever of a manual brake
   Removal and installation of ropes of a manual brake
   Check, removal and installation of the valve of adjustment of pressure in back brake mechanisms
   Removal, installation and adjustment of the switch of lanterns
   The general description of system of antiblocking of brakes (ABS)
   Removal and installation of components of system ABS
   Removal and installation of the vacuum pump (diesel engines)
   Check of serviceability and partition of the vacuum pump (diesel engines)
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Electric equipment schemes
Join the global community of movie enthusiasts on 123movies. 3bf7a351

Brake system


Forward brake mechanisms

The characteristic

The new


Thickness of the Disk - all models except Scenic:



   Models with continuous disks

12.0 mm

10.3 mm

   Models with ventilated disks:



      L models 1.6 (engines K7M 702 and 703)

20.0 mm

18.3 mm

      All other models

20.6 mm

19.0 mm

Thickness of a disk - Scenic:



   L models 1.4, and also model 1.6 of l with Manual transmission

20.6 mm

17.7 mm

   All other models

22.0 mm

19.8 mm

The maximum palpation of a disk

0.07 mm

The minimum thickness brake Pads (a basis and a brake overlay)

Address to the Head Maintenance service

Back brake mechanisms

The characteristic

All models except Scenic


Internal diameter of a drum:



   The new

203.2 mm

228.5 mm

   The maximum diameter after a repoint

204.4 mm

229.5 mm

The minimum thickness brake Pads (a basis and a brake overlay)

Address to the Head Maintenance service

The moments of an inhaling of Nanometer

The characteristic


The prorolling union


Disk of forward brake mechanisms to a nave


Support of forward brake mechanisms:


   Bolts of directing pins
   Fixing bolts


Connecting муфта a brake hose


Connecting nut of a brake tube


Fixing nuts of the main cylinder


Nut of a nave of a back wheel


Wheel bolts

Address to the Head Maintenance service

Fixing nuts of the block of the vacuum amplifier


Fixing bolts of the gauge of speed of rotation of a wheel (ABS)


Bolts of a back rotary fist - Scenic

Address to the Head the Suspension bracket and a steering

The general description

Some 2.0 l of model of the Compartment with 16 valves are equipped by back disk brakes. By the time of a writing of the given Management any data concerning these knots in the press was absent.

The brake hydrosystem is equipped by the amplifier and divided into two contours. Each of contours operates one of lobbies and диагонально opposite back in brake knots. Contours are connected to the general main cylinder. Under usual circumstances both contours work in a unison. However in default one of contours braking will be carried out at the expense of the second contour, on two wheels.
All models - are equipped by disk forward and back drum-type brakes (except 2.0 l of models of the Compartment with 16 valves). Lobbies are supplied by the supports of sliding type put in action by the cylinder with the unary piston. Thus equal pressure is applied on each of колодок. Back drum-type brake mechanisms have conducting and conducted Pads which are put in action by the working cylinder with pair pistons. The self-adjusted regulator built in brake knot automatically compensates the increase in a backlash caused by deterioration колодок
In a hydrowire of each back brake mechanism the valve sensitive to loading to pressure adjustment is built in. The valve is connected with a back axis and corrects pressure in system according to loading on an axis that helps to prevent blocking of back wheels during emergency braking.
The manual brake provides application of back brake mechanisms by means of an independent mechanical drive.

At carrying out of servicing of any part of system work accurately and methodically and carefully observe cleanliness. Replace a component (together with its pair established on an opposite side of the car) if there are any doubts concerning its condition. Use only firm spare parts Renault or, at least, high quality details. Take into consideration Preventions concerning danger of an asbestine dust and the brake liquid, resulted in this Chapter.