Reno Megan, Stsenik
+ Cars of mark Renault Megane
+ Maintenance service
+ Engine repair
+ System of cooling, heating
+ Power supply systems, release
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Brake system
+ Suspension bracket and steering
- Body
Body and bottom service
Care of an upholstery and rugs
Restoration of insignificant damages of a body
Considerable damages of a body - restoration
Removal and installation of a forward bumper
Removal and installation of a back bumper
Removal, installation and cowl adjustment
Removal and installation of a rope of the lock of a cowl
Removal and installation of the lock of a cowl
Removal and door installation
Removal and installation of the panel of furnish of doors
Removal and installation of the handle of a door and lock components
Removal and installation of glass of a door window and window lifterа
Removal and installation of a cover of a luggage carrier
Removal and installation of components of the lock of a cover of a luggage carrier
Removal and installation of a door of a luggage compartment
Removal and installation of components of the lock of a back door
Removal and installation of components of system of the uniform lock
Removal and installation of components electric window lifterа
Removal and installation of external mirrors and the connected components
The wind and back has flown down - the general information
The top hatch - the general information
Removal and installation of external elements кузовной furnish
Removal and installation of seats
System of a tension of seat belts of forward seats - the general information
Removal and installation of components of seat belts
Removal and installation of elements of internal furnish of salon
Removal and installation of the central console
Removal and installation of assemblage of the panel of devices
Control кузовные the sizes
+ Onboard electric equipment
+ Electric equipment schemes
|
Removal and installation of glass of a door window and window lifterа
GLASS OF THE FORWARD DOOR - ALL MODELS EXCEPT SCENIC
|
|
|
1. Lower window glass approximately on 3/4 downwards, then disconnect a cable of weight from the battery.
2. Remove the panel of furnish of a door as Removal and installation of the panel of furnish of doors is described in Section.
|
|
3a. Remove ударогасящую the panel from a door. |
|
|
3b. On models of the Compartment and Scenic the panel fastens screws, and on all the others - скобами (address to illustrations). |
|
|
4. On models the Hatchback and the Sedan disconnect an internal sealing strip of a window and remove it from a door (address to an accompanying illustration). On Compartment models disconnect the bottom and back parts of a sealing strip; there is no necessity to remove a strip completely. |
|
|
5a. Remove fixing скобу directing windows... |
|
|
5b.... Having shifted it with window lifterа (address to illustrations). |
|
|
6a. Release glass of a window from window lifterа. |
|
|
6b. Then slightly lower it. Release back directing from a sealing strip. |
|
|
6с. Then incline glass and extend it upwards (address to illustrations). |
|
|
MOVING GLASS OF THE FORWARD DOOR - MODELS SCENIC
|
|
|
1. Lower window glass approximately on 3/4 downwards, then disconnect a cable of weight from the battery
2. Remove the panel of furnish of a door as Removal and installation of the panel of furnish of doors is described in Section.
3. Remove ударогасящую the panel from a door. It fastens screws and скобами.
4. Accurately disconnect an internal sealing sealing strip of a window and remove it from a door.
5. Remove fixing скобу directing windows, having shifted it with window lifterа.
6. Turn away two bolts, fastening a rack (between sliding glass and neostarted up glass) to a door.
7. Release glass of a window from window lifterа, then lower it downwards.
8. Uncover furnish and a bolt of the top fastening of a dividing rack. Lower a rack downwards to release it from the top fastening. Turn a rack on 90 ° and remove it from a door.
9. Release back directing from a sealing strip, then incline glass and extend it upwards. |
|
NEOSTARTED UP GLASS OF THE FORWARD DOOR - MODELS - SCENIC
|
|
|
1. Execute the actions, described in paragraphs to MOVING GLASS of the FORWARD DOOR - MODELS SCENIC.
2. Pull a window back to release its forward part from a door framework. Remove glass from a door. |
|
CТЕКЛОПОДЪЕМНИК THE FORWARD DOOR
|
|
|
1. Remove a window as it is described above, depending on model.
|
|
2. On models with electric window lifterами disconnect a socket of electroconducting from the motor window lifterа (address to an accompanying illustration). |
|
|
3a. Turn away fixing nuts and bolts window lifterа and the bottom support of glass. |
|
|
3b. Then release assemblage from a door and remove it through a doorway (address to illustrations). |
|
|
MOVING GLASS OF THE BACK DOOR - MODELS THE HATCHBACK AND THE SEDAN
|
|
|
1. Lower window glass approximately on 3/4 downwards, then disconnect a cable of weight from the battery.
2. Remove the panel of furnish of a door as Removal and installation of the panel of furnish of doors is described in Section.
|
|
3. Accurately disconnect an internal sealing strip of a window and remove it from a door (address to an accompanying illustration). |
|
|
4. Turn away bolts, fastening window glass to window lifterу, then release glass and completely lower downwards (address to an accompanying illustration). |
|
|
5b.... To get access to the top screw of fastening back directing windows. |
|
|
5c. Then turn away the top and bottom screws. |
|
|
5d. Release a dividing rack from neostarted up glass, then release glass and completely lower it downwards (address to an accompanying illustration). |
|
|
6. Accurately remove glass from a door (address to an accompanying illustration). |
|
|
SHIFTING GLASS OF THE BACK DOOR - MODELS SCENIC
|
|
|
1. Lower window glass approximately on 3/4 downwards, then disconnect a cable of weight from the battery.
2. Remove the panel of furnish of a door as Removal and installation of the panel of furnish of doors is described in Section.
3. Turn away two bolts (top and bottom), fastening directing to a back part of a window to a door.
4. Disconnect an internal sealing strip of a window and remove it from a door.
5. Remove fixing скобу directing windows, having shifted it with window lifterа (address to the description above).
6. Release glass of a window from window lifterа, then lower it downwards.
7. Remove an external sealant of a door as follows. Remove an emblem on a rack of a back door. Beginning from a door first line release a sealant, using the flat tool to reach an adjusting ledge. When the sealant will reach a place where it concerns racks of a back door, lift it to liberate an adjusting ledge, then pull a sealant forward to let out a back adjusting pin.
8. Remove lateral directing glasses, having pulled it upwards.
9. Paste strips of a wide sticky tape on two vertical racks of a door to protect them at glass removal.
10. Accurately remove glass from a door. |
|
NEOSTARTED UP GLASS OF THE BACK DOOR - MODELS - THE HATCHBACK AND THE SEDAN
|
|
|
1. Remove moving glass as it is described above.
2. Shift glass forward and remove it from the car. |
|
BACK LATERAL WINDOW - COMPARTMENT MODELS
|
|
|
1. Open a window, then turn away the screw of fastening and release opening mechanism from a motor shaft.
2. Turn away the screw, крепящий the opening mechanism to a window, then remove washers and face заглушки from a window, marking their correct installation.
3. Ask the assistant to support a window, then turn away screws, fastening a window first line to loops. Remove распорные linings, rubber pillows and face заглушки, marking their correct installation. |
|
BACK LATERAL WINDOW - MODELS SCENIC
|
|
|
1. Back lateral windows on models Scenic are established on special glue. |
|
СТЕКЛОПОДЪЕМНИК THE BACK DOOR - MODELS THE HATCHBACK AND THE SEDAN
|
|
|
1. Remove moving glass as it is described in paragraphs above.
2. On models with electric window lifterами disconnect a socket of electroconducting from the motor window lifterа.
|
|
3. Turn away fixing bolts window lifterа, then release assemblage from a door and remove it through a doorway (address to an accompanying illustration). |
|
|
СТЕКЛОПОДЪЕМНИК THE BACK DOOR - MODELS SCENIC
|
|
|
1. Lower window glass approximately on 3/4 downwards, then disconnect a cable of weight from the battery.
2. Remove the panel of furnish of a door as Removal and installation of the panel of furnish of doors is described in Section.
3. Accurately disconnect an internal sealing strip of a window and remove it from a door.
4. Remove fixing скобу directing windows, having shifted it with window lifterа (address to the description above).
5. Release glass of a window from window lifterа and move it to the closed position. Paste glass to a framework of a door a sticky tape.
6. On models with electric window lifterами disconnect a socket of electroconducting from the motor window lifterа.
7. Turn on window lifter and fixing nuts/bolts of the bottom support of glass, then release assemblage from a door and remove it through a doorway. |
|
MOVING GLASS OF THE FORWARD DOOR - ALL MODELS
|
|
|
1. Make installation upside-down. Before installation of the panel of furnish, check up window functioning. |
|
NEOSTARTED UP GLASS OF THE FORWARD DOOR - MODELS SCENIC
|
|
|
1. Make installation upside-down. Before installation of the panel of furnish, check up window functioning. |
|
СТЕКЛОПОДЪЕМНИК THE FORWARD DOOR - ALL MODELS
|
|
|
1. Make installation upside-down. Before installation of the panel of furnish, check up window functioning. |
|
MOVING GLASS OF THE BACK DOOR - MODELS THE HATCHBACK AND THE SEDAN
|
|
|
|
1. Make installation upside-down. Before installation of the panel of furnish, adjust position of glass of a window. Loosen the fastening bolts, then completely lift a window and reliably tighten them (address to an accompanying illustration). |
|
|
MOVING GLASS OF THE BACK DOOR - MODELS SCENIC
|
|
|
1. Make installation upside-down. Before installation of the panel of furnish check up window functioning.
Neostarted up glass of a back door - models the Hatchback and the Sedan
2. Make installation upside-down. Watch that glass has been correctly placed in a sealing strip. |
|
BACK LATERAL WINDOW - COMPARTMENT MODELS
|
|
|
1. Make installation upside-down. Before installation of screws of a window, put some drops taking компаунда on their carving. |
|
СТЕКЛОПОДЪЕМНИК THE BACK DOOR - ALL MODELS
|
|
|
1. Make installation upside-down. Before installation of the panel of furnish, check up window functioning. |
|
|
|
