Forward seats (with electric adjustment)
Switches also serve for restoration of parametres of adjustment of a seat which are stored in a memory. The switch provides movings of a pillow of a seat (in a longitudinal direction and on height), and the switch - seat backs (on an angle of slope).
The system of electric adjustment of seats works under following conditions:
Ignition is included;
The driver's door is opened. (Thus electric adjustment of seats is possible within 4 minutes).
At performance of adjustment of a driver's seat the button should be in the included position (is drowned).
Adjustment of position of a pillow of a seat by means of the switch
For moving forward:
Move the switch handle forward.
For moving back:
Move the switch handle back.
For lifting of a pillow of a seat:
Shift a back part of the handle of the switch upwards.
For lowering of a pillow of a seat:
Shift a back part of the handle of the switch downwards.
Adjustment of an inclination of a back of a seat by means of the switch
For change of an inclination of a back
Move the switch handle forward or back.
From safety reasons spend adjustment of seats only on the motionless car.
STORING OF POSITIONS OF THE DRIVER'S SEAT
On your car possibility of storing of three positions of a seat of the driver is provided.
For memory inclusion it is necessary press V.Ustrojstvo's button can to work under following conditions:
- Ignition is included;
- The uniform lock of doors is disconnected by means of a remote control panel. (Thus it is possible to take advantage of a memory within 15 seconds after unlocking of doors). Short-term pressing one of three buttons With leads to automatic restoration of parametres of preliminary adjustment of a seat which are stored in a memory;
The driver's door is opened. (A memory it is possible to take advantage within 4 minutes).
Press the button for memory inclusion: the button is drowned in the included position.
From reasons of safety the memory fixes in memory only "working" positions of a driver's seat, suitable for driving. Inclined positions of a back of a seat (at the big corners of a deviation from a vertical), applied usually for rest, are not remembered by the device.
After seat position is adjusted properly, press the long button and then at once - on one of the buttons designated 1, 2 or 3.
1 First position of a seat
2 seats Second position
3 Third position of a seat
Switch off a memory once again having pressed the button.
Seat installation in the position fixed by a memory
a) Include a memory pressing the button.
b) Press one of the buttons designated 1, 2 or 3, which corresponds to your variant of installation of a seat. Keep the button in the pressed position until the seat automatically will not come to demanded position.
If you have included system of automatic adjustment of a seat (short pressing of the button) within 15 seconds after unlocking of the uniform electric lock by means of a remote control, wait the terminations of adjustments and only then get the engine. Do not touch buttons of management of adjustments, otherwise process of automatic installation of a seat in demanded position will be interrupted.
c) Press the button for deenergizing of a memory or interruption of automatic installation of a seat if it is necessary.