Renault Megane, Scenic

Since 1996 of release

Repair and car operation



Reno Megan, Stsenik
+ Cars of mark Renault Megane
+ Maintenance service
+ Engine repair
+ System of cooling, heating
+ Power supply systems, release
+ Engine electric equipment
- Coupling
   Removal and installation of a rope of coupling
   Course check, removal and installation of a pedal of coupling
   Removal, survey and installation of a basket of coupling
   Removal, survey and installation выжимного the bearing
+ Transmission
+ Power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Electric equipment schemes
3bf7a351




Removal and installation of a rope of coupling

 REMOVAL

1. Remove a coupling pedal as it is described in Section course Check, removal and installation of a pedal of coupling and adhere to the end of a rope of coupling a twine piece.
2. On all engines, except E7J, remove assemblage of the air filter and its air lines (address to the Head of the Power supply system and release).
3. Having unhooked a rope, separate its casing from an arm on transmission. Moving along a rope, let out it from fixing скоб and couplers.
4. Let out a tip of a rope of coupling from a partition and remove a rope from the car. When there will be a rope end, untie from it a twine and leave it to hang in a partition - it will help to drag at installation a rope into position.
5. Examine a rope, checking, whether tips, a casing or a rope are worn out. Be convinced that the rope moves in a casing easily and without jerks. Replace a rope if it is worn out or damaged.


 INSTALLATION

6. Deduce a rope into position, having laid it on a former place, and, using a twine, extend the rope end through a partition in salon. Fix a rope tip in a partition.
7. Attach a rope in working position by all скобами and couplers and place the end of a casing of a rope turned to transmission in a fixing arm.
8. Establish a pedal of coupling and check up action of an automatic regulator as it is described in Section course Check, removal and installation of a pedal of coupling.
9. Establish assemblage of the air filter and its air lines.